Xinje DS5B Series - Product Installation; 2-1.Servo Drive Installation; 2-1-1.Installation Location; 2-1-2.Environment Conditions

2.Product installation
2-1.Servo drive installation
2-1-1.Installation location
 Please install in the cabinet without sunshine and rain
 Please get away from corrosive and flammable gases
 please do not install in high temperature, humidity, dust, metal dust environment
 No vibration location
2-1-2.Environment conditions
Item
Description
Using temperature
0℃~40℃ (not freeze)
Using humidity
-20%~90%RH (no condensation)
Storage
temperature
-20℃~60℃
Storage humidity
-20%~90%RH (no condensation)
Protection level
IP65
2-1-3.Installation standard
Be sure to comply with the installation standard in the control panel shown below, which is
applicable for installing multiple servo drives side-by-side in the control panel (hereinafter
called "side-by-side installation" for short).