Xinje DS5B Series - Change Motor Code

P3-09 to change the value.
7
STA/ESC INC DEC ENTER
Press INC, DEC, ENTER to
increase decrease or shift, keep
press ENTER to confirm after
changing.
8
Operation end
4-3. Change motor code
(1) One servo drive can match several servo motors with same power level. Before
using the servo system, please make sure the motor code on the servo motor label is
the same to P0-33.
(2) If the motor code setting is error, it will show E-310, please clear the alarm through
F0-00, then set the correct code.
XINJE
SERVO DRIVER
DS5B-20P7-PTA
WARNING
CAUTION
AC INPUT:1PH/3PH 200-240V 50/60Hz 3.5A
AC OUTPUT:3PH 0-200V 3.5A 0.75KW
12052013
WUXI XINJE ELECTRIC CO.,LTD
Model
Warning
Input power supply
specification
Output power supply
specification
Serial no.
Drive lable
P0-33
Re-power
On servo
Keep press
ENTER
Finish
the setting
confirm
Input
motor code
Keep press
ENTER