Xinje DS5B Series - FX-XX Auxiliary Function

4-1-3. FX-XX auxiliary function
 F0-XX
Function No.
Description
F0-00
Clean the alarm
F0-01
Back to out of factory settings
F0-02
Clean the offset
1. Clean the alarm
Set F0-00=1 to reset the alarm. When the alarm occurred, please find out the alarm reasons
then clean the alarm.
2. Back to out of factory settings
Please power off the servo drive before the operation.
Set F0-01=1, then press ENTER. No need to re-power the servo drive.
3. Clean the offset
Set F0-02=1 to clean the offset.
 F1-XX
Function code
Explanation
F1-00
Jog run
F1-01
Test run
F1-02
Current sampling zero calibration
F1-05
Panel enable
F1-06
Absolute encoder clear number of
turns