Need help?Do you have a question about the Xinje VH5 Series and is the answer not in the manual?
General| Model | VH5 Series |
|---|---|
| Category | Network Hardware |
| Power Supply | 24VDC |
| Protocol Support | Ethernet/IP |
| Communication Interface | Ethernet |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
Describes the components and LED indicators of the VH5-CC100 card.
Describes the components and LED indicators of the VH6-CC100 card.
Provides step-by-step instructions for installing the VH5-CC100 card.
Provides step-by-step instructions for installing the VH6-CC100 card.
Assigns areas within the CoE and VHX-CC100 object dictionaries.
Details index, sub-index, name, data type, and access for COE communication.
Maps VFD panel parameters to object dictionary entries for user-defined areas.
Defines objects for independent protocol communication with VFDs.
Lists CiA402 objects for driver profile area, including index, type, name, and PDO mapping.
Explains the VFD operation state transitions using a state machine diagram.
Describes the meaning of each status in the VFD state machine.
Details EtherCAT use case with XINJE XDH series PLC and VH5/VH6.
Configuration steps for CIA 402 protocol and Independent protocol.
To Next Page