Xinje XC3 Series User Manual

Appendix 2 instructions list
Appendix 2 Instructions List
In this chapter, we will list all the instructions XC series PLC support. These instructions include:
basic instructions, application instructions, special function instructions and motion control
instructions. Also, we declare each instruction’s application range.
This part enables the users to check the instruction’s functions much faster. For the detailed
application, please refer to《XC Series Programmable Controller【Instruction Part】》。
Appendix 2-1．Basic Instructions List
Appendix 2-2．Application Instructions List
Appendix 2-3．Special Function Instructions List
Appendix 2-4．Motion Control Instructions List

Xinje XC3 Series Specifications

General

Series	XC3
Type	PLC
Communication Ports	RS232, RS485
Power Supply	24V DC
CPU Type	32-bit
Programming Software	XCP Pro
Operating Temperature	55°C
Analog Inputs	Optional, depends on expansion modules
Analog Outputs	Optional, depends on expansion modules