Xinje XC3 Series User Manual

Appendix 3 version for special function
Appendix 3 Version for special function
Generally, the functions and instructions described in this manual don’t have software and
hardware requirements. But for some special functions, we have software and hardware versions
requirement. Below, we list these requirements for the special functions;
function Hardware version Software version
Fill move 32 bits instruction DFMOV V3.0 and above V3.0 and above
Anti-trigonometric Operation V3.0 and above V3.0 and above
Read/write clock V2.51 and above V3.0 and above
Read/write high speed counter V3.1c and above V3.0 and above
Interrupt high speed counter V3.1c and above V3.0 and above
Read precise time V3.0e and above V3.0 and above
Stop precise time V3.0e and above V3.0 and above
C program block function V3.0c and above V3.0 and above
PID function V3.0 and above V3.0 and above
Block V3.1i and above V3.1h and above
Connect T-BOX V3.0g and above V3.0 and above
Connect G-BOX V3.0i and above V3.0 and above
Read/write XC-E6TCA-P、XC-E2AD2PT3DA、XC-E2AD2PT2DA
V3.1f and above V3.1b and above
Expand register ED V3.0 and above V3.0 and above

Xinje XC3 Series Specifications

General

Series	XC3
Type	PLC
Communication Ports	RS232, RS485
Power Supply	24V DC
CPU Type	32-bit
Programming Software	XCP Pro
Operating Temperature	55°C
Analog Inputs	Optional, depends on expansion modules
Analog Outputs	Optional, depends on expansion modules