Xinje XC3 Series User Manual

5 input specifications and wiring methods
5-1．Input Specification
Input signal’s voltage DC24V±10%
Input signal’s current 7mA/DC24V
Input ON current Up to 4.5mA
Input OFF current Low than 1.5mA
Input response time About 10ms
Input signal’s format Contact input or NPN open collector transistor
Circuit insulation Photo-electricity coupling insulation
Input action’s display LED light when input ON
Input signal’s voltage DC24V±10%
Input signal’s current 7mA/DC24V
Input ON current Up to 4.5mA
Input OFF current Low than 1.5mA
Input response time About 10ms
Input signal’s format Contact input or NPN open collector transistor
Circuit insulation Photo-electricity coupling insulation
Input action’s display LED light when input ON
Basic Units
1
Expansion Modules 2

Xinje XC3 Series Specifications

General

Series	XC3
Type	PLC
Communication Ports	RS232, RS485
Power Supply	24V DC
CPU Type	32-bit
Programming Software	XCP Pro
Operating Temperature	55°C
Analog Inputs	Optional, depends on expansion modules
Analog Outputs	Optional, depends on expansion modules