Xinje XC3 Series - 5-3-4．AB Phase Counters Frequency Multiplication Setting

5 input specifications and wiring methods
5-3-4．AB Phase Counter's Frequency Multiplication Setting
To AB phase counter, user can modify the value in FLASH data registers FD8241, FD8242,
FD8243 to set the frequency multiplication value. When the value is 1, it is 1 time frequency;
when the value is 4, it is 4 times frequency.
1※ ：For more information about high speed counter, please refer to 《XC series PLC user manual [Instruction
Part]》
2※ ：To some special model, only one axis can be set as one time frequency or 4 times frequency, the left two axis
are separately one time frequency and 4 times frequency.
XC5-24/32 PLC、XCM-24/32 PLC
Increment Mode Pulse + direction mode AB phase mode
C600 C602 C604 C606 C608 C610 C612 C614 C616 C618 C620 C622 C624 C626 C628 C630 C632 C634
Max.
Freq.
80K
10K 80K 80K
4-time
Freq.
√
Count
Interrupt
√ √ √ √
X000 U U A
X001 Dir B
X002
X003 U
X004
X005
X006
Register Function Setting Value Content
1 1 time frequency
FD8241
Frequency Multiplication of
C630
4 4 time frequency
1 1 time frequency
FD8242
Frequency Multiplication of
C632
4 4 time frequency
1 1 time frequency
FD8243
Frequency Multiplication of
C634
4 4 time frequency