Xinje XC3 Series User Manual

Appendix 5 common question A&Q
（1）check if the thermocouple cold point is short with the outside cover. If short, please
change another thermocouple.
（2）the weak electricity such as outside interference, thermocouple, temperature module
should separate from the strong electricity, make sure there is certain distance
between them. If the device has motor, inverter, make sure to connect the ground
correctly.

Xinje XC3 Series Specifications

General

Series	XC3
Type	PLC
Communication Ports	RS232, RS485
Power Supply	24V DC
CPU Type	32-bit
Programming Software	XCP Pro
Operating Temperature	55°C
Analog Inputs	Optional, depends on expansion modules
Analog Outputs	Optional, depends on expansion modules