As industrial Ether Net module, T-BOX supports Modbus-RTU devices, the design is applied to
industrial Ether net control system.
l Remote integral maintenance and diagnose of PLC program on IP devices;
l Remote integral monitor of PLC program on IP devices;
l The traditional Modbus communication is one master, multi-slave form. The
communication speed is slow. Via the connection by T-Box, users can realize the data
exchange among master PLC and each subsidiary PLCs.
l Realize flexible distributing automation structure, simplify the system management
l Realize Ether net visit via RJ45 interface, the communication is based on standard
TCP/IP protocol
l Realize remote program, monitor, diagnose via industrial Ether net, save great time and
cost;
l Store and operate data information via Ether net, build base to simplify the data disposal
and file
l Enable the communication between Ether net and automation equipments, enable these
devices to be used in complicated systems;
l High performance-price ratio, link the ether net to all the automation devices and levels
in a simple form.
l Easy to maintenance, support simple diagnose function
2
T-BOX
To Next Page
Loading...
