Xirrus XR2425H User Manual

Wireless Access Point
460 The Command Line Interface
dns
The dns command [MyAP(config-dns)#] is used to configure your DNS
parameters.
Command Description
domain Enter your domain name.
FORMAT:
dns domain [www.mydomain.com]
server1 Enter the IP address of the primary DNS server.
FORMAT:
dns server1 [1.2.3.4]
server2 Enter the IP address of the secondary DNS server.
FORMAT:
dns server1 [2.3.4.5]
server3 Enter the IP address of the tertiary DNS server.
FORMAT:
dns server1 [3.4.5.6]
use-dhcp Enable or disable updates to DNS settings via
DHCP.
FORMAT:
dns use-dhcp [off | on]

Xirrus XR2425H Specifications

General

Brand	Xirrus
Model	XR2425H
Category	Wireless Access Point
Language	English