2.4 Storage guidelines
Storage location
The product must be stored in a covered and dry location free from heat, dirt, and vibrations.
NOTICE:
Protect the product against humidity, heat sources, and mechanical damage.
NOTICE:
Do not place heavy weights on the packed product.
Long-term storage
If the unit is stored for more than six months, then the following apply:
•
Before operating the unit after storage, it must be inspected. Special attention must be
given to the seals and the cable entry.
• The impeller or propeller must be rotated every other month to prevent the seals from
sticking together.
2 Transportation and Storage
P7030, P7035, P7040 Installation, Operation, and Maintenance Manual 11
To Next Page
Loading...
