Xylem FLYGT P7030 Series - Remove the Propeller

Pump Wear measured, mm (in) Action
7035 0.3 (0.012) Replace the propeller
0.9 (0.035) Replace the bellmouth
7040 0.4 (0.016) Replace the propeller
1.2 (0.047) Replace the bellmouth
6.8.2 Remove the propeller
CAUTION: Cutting Hazard
Sharp edges. Wear protective clothing.
1. Lock the propeller in place by inserting a rod or piece of wood through the pump housing
outlet.
WS003620A
2. Loosen the propeller:
a)
Remove the propeller screw and washer.
WS003615A
b) Turn the adjustment screw counterclockwise until the propeller breaks free from the
shaft.
Use the trim tool.
6 Maintenance
72 P7030, P7035, P7040 Installation, Operation, and Maintenance Manual