3.9 The data plate
The data plate is a metal label that is located on the main body of the products. The data
plate lists key product specifications. Specially approved products also have an approval
plate.
WS006257C
24
23
25
8
7
6
5
4
1312 14 17
18 19
16159 10 11
22
21
20
2
3
1
1. Curve code or Propeller code
2.
Serial number
3. Product number
4. Country of origin
5. Additional information
6. Phase; type of current; frequency
7. Rated voltage
8. Thermal protection
9. Thermal class
10.Rated shaft power
11.International standard
12.Degree of protection
13.Rated current
14.Rated speed
15.Maximum submergence
16.Direction of rotation: L=left, R=right
17.Duty class
18.Duty factor
19.Product weight
20.Locked rotor code letter
21.Power factor
22.Maximum ambient temperature
23.Read installation manual
24.Notified body, only for EN-approved Ex products
25.WEEE-Directive symbol
Figure 5: The data plate
3.10 Motor regulation
This product is submersible and therefore exempted from the motor efficiency requirement,
in accordance with EU commission regulation 2019/1781 Article 2(2)(e).
3.11 Approvals
Product approvals for hazardous locations
Pump Approval
7030.090
7035.090
7040.090
European Norm (EN)
• ATEX Directive
• EN 60079-0:2012/A11:2013, EN 60079-1:2014, EN ISO 80079-36:2016,
EN ISO 80079-37:2016
•
II 2 G Ex db h IIB T3 Gb
3 Product Description
22 P7030, P7035, P7040 Installation, Operation, and Maintenance Manual
To Next Page
Loading...
