Install the pump. See
Install the pump
on page 32.
4.5 Install the pump
Consult the nearest Xylem representative regarding the following topics:
• Sizing of the pump, piping station, and access frame
• Choice of auxiliary equipment
• Other aspects of installation
DANGER: Explosion/Fire Hazard
Special rules apply to installations in explosive or flammable atmospheres. Do not install the
product or any auxiliary equipment in an explosive zone unless it is rated explosion-proof or
intrinsically-safe. If the product is rated explosion-proof or intrinsically-safe, then see the
specific explosion-proof information in the safety chapter before taking any further actions.
WARNING: Explosion/Fire Hazard
Before starting any permit-required hot work such as welding, gas cutting, grinding, or using
electrical handtools, do the following: 1. Check the explosion risk. 2. Provide sufficient
ventilation.
WARNING: Fall Hazard
Check that suitable barriers for the work area are in place.
WARNING: Electrical Hazard
Risk of electrical shock or burn. A certified electrician must supervise all electrical work.
Comply with all local codes and regulations.
4 Installation
32 P7030, P7035, P7040 Installation, Operation, and Maintenance Manual
To Next Page
Loading...
