Xylem wtw Multi 3630 IDS - Switching on the Meter; Switching off the Meter

Multi 3630 IDS Operation
ba77170e03 10/2017 21
4.2 Switching on the meter
4.3 Switching off the meter
30.09.2015 08:00
Info
30.09.2015 08:00
Info
1 Switch the meter on with <On/Off>.
The meter performs a self-test.
2 Connect the sensor.
The meter is ready to measure.
If the user administration function is activated, the Login dialog
appears after the meter is switched on (see section 4.4).
The user administration function is not active in the delivery condi-
tion.
The user administration is activated by the administrator via the PC
software MultiLab User (see MultiLab User operating manual).
1 Switch the printer off with <On/Off>.
30.09.2015 08:00
Info