Xylem wtw Multi 3630 IDS - Example 2 on Navigation: Setting the Date and Time

Multi 3630 IDS Operation
ba77170e03 10/2017 27
4.5.5 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated in
the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
 Current date and time
5 Select the General submenu with <><>.
The current selection is displayed with a frame.
6 Open the General
submenu with <ENTER>.
7 Open the setting mode for the Language with <ENTER>.
8 Select the required language with <><>.
9 Confirm the setting with <ENTER>.
The meter switches to the measuring mode.
The selected language is active.
Language: Deutsch
Acoustic signal: off
Volume 5
Illumination: on
Kontrast: 50 %
Switchoff time: 1 h
Temperature unit: °C
Stability control: on
General
30.09.2015 08:00
Language: Deutsch
Acoustic signal: off
Volume 5
Illumination: on
Brightness: 50 %
Switchoff time: 1 h
Temperature unit: °C
Stability control: on
General
30.09.2015 08:00