Xylem wtw Multi 3630 IDS - Navigation; Operating Modes

Multi 3630 IDS Operation
ba77170e03 10/2017 23
Changing the
password
If the administrator has set up the access with password protection:
Forgotten the
password?
Contact the administrator.
4.5 Navigation
4.5.1 Operating modes
5 Change the digit of the highlighted position with <><>.
Switch to the next position of the password with <><>.
When the password was completely entered, confirm with <ENTER>.
The login takes place. If a sensor is connected the measured value dis-
play appears.
1 Switch the meter on with <On/Off> (or <On/Off_>).
The Login dialog appears.
2 Using <><>, select the menu item, User name and confirm with
<ENTER>.
The user name is highlighted.
3 Using <><>, select a user name and confirm with <ENTER>.
4 Using <><>, select the menu item, Change password and confirm
with <ENTER>.
5 In the Password field, enter the old password with <><> and
<><>and confirm it with <ENTER>.
6 In the New password field, enter the new password with <><> and
<><>and confirm it with <ENTER>.
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.
Operating
mode
Explanation
Measuring The measurement data of the connected sensor are shown
in the measured value display
Calibration The course of a calibration with calibration information, func-
tions and settings is displayed