Xylem wtw Multi 3630 IDS - Page 25

Multi 3630 IDS Operation
ba77170e03 10/2017 25
the setting can be changed with <><> and <ENTER>. Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>. Example: Display the Calibration
record function.
 Messages
Information is marked by the [
i ] symbol. It cannot be selected. Example:
The principles of navigation are explained in the two following sec-
tions by reference of examples:
 Setting the language (section 4.5.4)
 Setting the date and time (see section 4.5.5).
Language: Deutsch
Acoustic signal: off
Volume 9
Illumination: on
Brightness: 12
Switchoff time: 1 h
Temperature unit: °C
Stability control
: on
General
30.09.2015 08:00
Calibration record
Calibration data storage
Buffer: TEC
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[
i ] 2.00 4.01 7.00 10.01 (25 °C)
pH
30.09.2015 08:00
Calibration record
Calibration data storage
Buffer: TEC
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[
i ] 2.00 4.01 7.00 10.01 (25 °C)
pH
30.09.2015 08:00