EasyManua.ls Logo

Yaesu FT-2000D - Page 95

Yaesu FT-2000D
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 93FT-2000D OPERATING MANUAL
CW CONVENIENCE FEATURES
CONTEST MEMORY KEYER
(
USING THE OPTIONAL FH-2 REMOTE CONTROL KEYPAD
)
5. Press the
[
1
]
~
[
5
]
key on the FH-2 to begin the memory
storage process.
6. Send the desired message using your keyer paddle.
7. Press the
[
MEM
]
key on the FH-2 once more at the
end of your message. Up to 50 characters may be stored
among the five memories.
LOCK
OFFON
LOCK
OFFON
NOTE:
You must exercise care in sending to ensure that the spaces
between letters and words are accurately done; if your tim-
ing is off, the spacing may not come out right in the stored
message.
For ease in setting up the keyer memories, we recommend
you set Menu item “054 A1A F-TYPE” and/or “056 A1A
R-TYPE” to “
ACSACS
ACSACS
ACS” (Automatic Character Spacing) while
you are programming the keyer memories.
LOCK
OFFON
CHECKING THE CW MEMORY CONTENTS
1. Be sure that Break-in is still turned Off.
2. Press the
[
MONI
]
button to enable the CW monitor.
3. Press the FH-2’s
[
1
]
~
[
5
]
key to check your work.
You will hear the results in the sidetone, but no RF
energy will be transmitted.
NOTE:
You may adjust the monitor level using the
[
MONI
]
knob.
ON-THE-AIR CW MESSAGE PLAYBACK
1. Press the
[
BK-IN
]
button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item “060 A1A BK-IN.”
2. Press the FH-2’s
[
1
]
~
[
5
]
key to transmit the pro-
grammed message.
M
ESSAGE
M
EMORY
P
ROGRAMMING
(
U
SING
YOUR
P
ADDLE
)
1. Set the operating mode to CW.
2. Set the
[
BK-IN
]
button to Off.
3. Turn the internal Electronic Keyer On by pressing the
[
KEYER
]
button, if necessary.
4. Press the FH-2’s
[
MEM
]
key.
LOCK
OFFON
NOTE:
If you subsequently decide to use the “Text Memory” tech-
nique for memory storage, please note that the contents of
a message stored using keyer paddle input will not be trans-
ferred over when you select “Text Memory technique” on
a particular memory register (the Menu Mode Setting is
set to “
tyP1tyP1
tyP1tyP1
tyP1”).
LOCK
OFFON

Table of Contents

Related product manuals