Yaesu FT-2000D - Contest Memory Keyer; (Using the Optional FH-2 Remote Control Keypad); Message Memory

Page 92 FT-2000D OPERATING MANUAL
You may also utilize the CW message capability of the FT-2000D from the optional FH-2 Remote Control Keypad, which
plugs into the rear panel’s REM jack.
Message Memory
Five memory channels capable of retaining 50 characters total are provided (using the PARIS standard for characters and
word length).
Example: CQ CQ CQ DE W6DXC K (19 characters)
CONTEST MEMORY KEYER
(
USING THE OPTIONAL FH-2 REMOTE CONTROL KEYPAD
)
CW CONVENIENCE FEATURES
S TORING A M ESSAGE INTO M EMORY
1. Press the
[
MENU
]
button to enter the Menu mode.
2. Rotate the Main Tuning Dial knob to select the CW
Memory Register into which you wish to store the
message; for now, we are just selecting the message
entry technique (Keyer entry).
021 tEy CW MEM1
022 tEy CW MEM2
023 tEy CW MEM3
024 tEy CW MEM4
025 tEy CW MEM5
3. Rotate the
[
SUB VFO-B
]
knob to set the selected
Memory Register to “
tyP2tyP2
tyP2tyP2
tyP2.” If you want to use your
keyer paddle for message entry on all memories, set
all five Menu items (#021 ~ 025) to “
tyP2tyP2
tyP2tyP2
tyP2.”
4. Press and hold in the
[
MENU
]
button to save the new
settings and exit.
Main Tuning Dial Knob
[
SUB VFO-B
]
Knob
[
MENU
]
Button