11-37
11
11-5 Communication Command Description
COMMUNICATION WITH PC
Deletes a program.
Program number : This is a number used to identify each program and can be from 0
to 99.
Transmission example : @DEL 10 c/r l/f............................ Deletes program No. 10.
Response example 1 : OK c/r l/f
Response example 2 : NG c/r l/f ...................................... The program to be deleted is
not registered.
43: cannot find PGM c/r l/f
(9)
@PDEL <point number>,<number of points>
Deletes point data. Deletes the specified number of points starting with the point number speci-
fied here.
Point number : This is a number assigned to each point and can be from 0 to 999.
Number of points : Any number between 1 and 999 can be specified.
Transmission example : @PDEL 16,10 c/r l/f .................... Deletes 10 points starting from
point 16 (up to point 25).
Response example : OK c/r l/f
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
