Yamaha EH63 - Page 33

PERIODIC MAINTENANCE
2-7
1
2
3
4
5
6
7
8
9
10
PERIODIC CHECKS AND ADJUSTMENTS
a. Remove the oil filter “1” using an oil filter wrench
(commercially available product) “2”.
b. Apply a thin layer of engine oil to the O-ring “3” of
the new oil filter.
c. Install the new oil filter and tighten with an oil filter
wrench (commercially available product).
5. Install:
• Oil drain bolt gasket “2”
• Oil drain bolt “1”
2
1
1
2
Oil filter wrench 65 mm (2.55 in)
A. EH63K/EH64A/EH64K/EH65A/EH65B
B. EH72A/EH72B/EH72K
Check that the O-ring “3” is correctly installed in the
groove portion of the oil filter.
Oil filter:
12 N·m (1.2 kgf·m, 8.9 lb·ft)
NOTICE
T
R
.
.
1
2
1
2
Oil drain bolt:
21 N·m (2.1 kgf·m, 15 lb·ft)
A. EH63K/EH64A/EH64K/EH65A/EH65B
B. EH72A/EH72B/EH72K
New
T
R
.
.