Operation
64
To shift from in gear (forward/reverse) to
neutral
1. Close the throttle so that the engine
slows to idle speed.
2. After the engine is at idle speed in gear
move the control lever firmly and crisply
into the neutral position.
EMU31742
Stopping boat
EWM01510
● Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or im-
pact the steering wheel or other parts of
the boat. This could increase the risk of
serious injury. It could also damage the
shift mechanism.
● Do not shift into reverse while traveling
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle.
The stopping distance varies depending on
gross weight, water surface conditions, and
wind direction.
EMU35891
Operating the port / center /
starboard engine
The outboard motor to be used can be se-
lected with the main switch or Start/Stop but-
ton.
ECM01740
Be sure to tilt the unoperated motor up.
Otherwise water could enter the exhaust
6AW-9-25-1E0 64 ページ ２０１０年３月１６日 火曜日 午後５時４５分
To Next Page
Loading...
