Operation
73
The engine can also be stopped by pulling
the engine shut-off cord and removing the
clip from the engine shut-off switch, then
turning the main switch on the main station to
“ ” (off).
2. Remove the key if the boat will be left un-
attended.
EMU27862
Trimming outboard motor
EWM00740
Excessive trim for the operating condi-
tions (either trim up or trim down) can
cause boat instability and can make
steering the boat more difficult. This in-
creases the possibility of an accident. If
the boat begins to feel unstable or is hard
to steer, slow down and/or readjust the
trim angle.
The trim angle of the outboard motor helps
determine the position of the bow of the boat
in the water. Correct trim angle will help im-
prove performance and fuel economy while
reducing strain on the engine. Correct trim
angle depends upon the combination of
boat, engine, and propeller. Correct trim is
also affected by variables such as the load in
the boat, sea conditions, and running speed.
6AW-9-25-1E0 73 ページ ２０１０年３月１６日 火曜日 午後５時４５分
To Next Page
Loading...
