Yamaha FZ 25 2021 - Page 54

2-17
SPEC
TIGHTENING TORQUES
Front brake master cylinder cap screw – 2 1.5 N·m (0.15 kgf·m, 1.1 lb·ft)
Front brake hose union bolt M10 2 24 N·m (2.4 kgf·m, 18 lb·ft)
Brake hose holder and front fork outer
tube bolt
M6 1 7 N·m (0.7 kgf·m, 5.2 lb·ft)
Brake hose holder and lower bracket bolt M6 1 10 N·m (1.0 kgf·m, 7.4 lb·ft)
Footrest and frame bolt M8 2 28 N·m (2.8 kgf·m, 21 lb·ft)
Sidestand nut M10 1 44 N·m (4.4 kgf·m, 32 lb·ft)
Shift pedal bolt M10 1 25 N·m (2.5 kgf·m, 18 lb·ft)
Shift arm and shift shaft bolt M6 1 14 N·m (1.4 kgf·m, 10 lb·ft)
Footrest pin screw M8 2 10 N·m (1.0 kgf·m, 7.4 lb·ft)
Footrest cover screw M5 4 4 N·m (0.4 kgf·m, 3.0 lb·ft)
Footrest plate screw – 4 8 N·m (0.8 kgf·m, 5.9 lb·ft)
Rear brake switch stay bolt M6 1 10 N·m (1.0 kgf·m, 7.4 lb·ft)
Front brake lever nut M7 1 6 N·m (0.6 kgf·m, 4.4 lb·ft)
Rear brake disc bolt M8 3 23 N·m (2.3 kgf·m, 17 lb·ft)
Rear brake caliper sliding pin bolt (small) – 1 12 N·m (1.2 kgf·m, 8.7 lb·ft)
Rear brake pad pin bolt – 2 17 N·m (1.7 kgf·m, 13 lb·ft)
Rear brake caliper sliding pin bolt (long) – 1 22 N·m (2.2 kgf·m, 16 lb·ft)
Rear brake caliper bleed screw M8 1 6 N·m (0.6 kgf·m, 4.4 lb·ft)
Rear brake hose holder bolt M6 1 7 N·m (0.7 kgf·m, 5.2 lb·ft)
Rear brake hose union bolt M10 2 30 N·m (3.0 kgf·m, 22 lb·ft)
Rear brake master cylinder bolt M8 2 23 N·m (2.3 kgf·m, 17 lb·ft)
Rear brake fluid reservoir cap screw – 2
1.5 N·m (0.15 kgf·m, 1.1 lb·ft)
Rear brake fluid reservoir bolt M6 1 7 N·m (0.7 kgf·m, 5.2 lb·ft)
Item
Thread
size
Q’ty Tightening torque Remarks
B9X-F8197-E0.book Page 17 Thursday, July 16, 2020 2:28 PM