154 Chapter 13—Grouping Channels & Linking Parameters
01V96 Version 2—Owner’s Manual
Linking EQ and Compressor Parameters
Follow the steps below to link EQ or compressor parameters for Input Channels or Output
Channels. This function enables you to set EQ or compressor parameters for multiple chan-
nels to the same values simultaneously.
1 Press the DISPLAY ACCESS [PAIR/GROUP] button repeatedly until one of the
following pages appears.
-In EQ page
This page enables you to set EQ links (a–d) for Input Channels 1–32 and ST IN Chan-
nels 1–4.
-Out EQ page
This page enables you to set EQ links (e–h) for Bus Outs (1–8), Aux Outs (1–8) and Ste-
reo Out.
To Next Page
Loading...
Need help?
General
