Pro Tools Remote Layer 191
01V96 Version 2—Owner’s Manual
Remote Control
17
5 If you are using Mac OS versions 8.6 through 9.2.2, choose OMS Studio Setup
from the Setups menu, and configure OMS as necessary.
Refer to the documentation
that came with OMS for more
information on configuring
the OMS Studio Setup menu.
OMS recognizes the 01V96 as
a USB MIDI interface that fea-
tures eight ports.
6 Choose Peripherals from the Setups menu to open the Peripherals window.
7 Double-click the MIDI Controllers tab.
8 Refer to the screen below to set the Type, Receive From, Send To, and #Ch’s
parameters.
The 01V96 can emulate up to two MIDI controllers.
9 When you finish setting the parameters, close the window.
Tip: To control Pro Tools remotely, you need one port for every eight audio channels.
To Next Page
Loading...
Need help?
General
