Yamaha PSR-A3000 - Page 171

PSR-A3000 Owner’s Manual 171
5
Multi Pads
4 Edit the selected Pad.
5 Save the current Bank containing the edited Multi Pads.
Press the [8 ] button to call up the confirmation window, press the [F] (YES) button to call up the USER
page, then press the [6 ] (SAVE) button to carry out the Save operation. For details, refer to page 28.
[1 ] NAME Changes the name of each Multi Pad.
[3 ] COPY Copies the Multi Pad(s). See below.
[4 ] PASTE Pastes the Multi Pad(s) copied by the [3 ] button.
[5 ] DELETE Deletes the selected Multi Pads.
Copying the Multi Pad
1. Press the [3 ] (COPY) button in step 4 above.
2. Select the Multi Pads to be copied by using the [A], [B], [F] and [G] buttons, then press the [7 ] (OK) but-
ton.
The selected Multi Pad(s) is copied to the clipboard.
3. Select the destination location by using the [A], [B], [F] and [G] buttons. If you want to copy the selected
Pad(s) to another bank, press the [8 ] (UP) button to call up the Multi Pad Bank Selection display, select the
desired bank, press the [7 ] (EDIT) button of MENU 1, then select the destination.
4. Press the [4 ] (PASTE) button to carry out the Copy operation.