24 PSR-A3000 Owner’s Manual
The display that appears when the power is turned on is the Main display. This
display shows the current basic settings such as the currently selected Voice and
Style, allowing you to see them at a single glance. The Main display is the one you’ll
usually see when you play the keyboard.
1 Song name and related information
Displays the currently selected Song name, time signature and tempo. Pressing
the [A] button calls up the Song Selection display (page 62).
2 Split Point
Displays the Split Point positions (page 58).
3 BAR/BEAT/Tempo
Displays the current position (bar/beat/tempo) in Style playback or Song
playback.
4 Current chord name
When the [ACMP] button is set to on, the chord specified in the chord section
of the keyboard will be displayed. When the Song containing the chord data is
played, the current chord name will be displayed.
5 Scale Tune setting button
Pressing the [B]/[C] buttons calls up the SCALE TUNE display (page 108) for
making scale settings.
6 Scale Tune Bank name
Displays the currently selected Scale Tune Bank. Pressing the [D] button calls
up the Scale Tune Bank Selection display (page 90).
7 Style name and related information
Displays the currently selected Style name, time signature and tempo. Pressing
the [E] button calls up the Style Selection display (page 49).
8 Voice name
Displays the Voice names currently selected for RIGHT 1, RIGHT 2 and LEFT
parts (page 36). Use the [F], [G] and [H] buttons to call up the Voice Selection
Main Display Configuration
You can quickly call up the Main dis-
play by pressing the [DIRECT
ACCESS] button, followed by the
[EXIT] button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
