Why is only a beep heard when the alarm sounds on my Yamaha TSX-112 Stereo System?
If your Yamaha Stereo System only beeps when the alarm goes off instead of playing music, it could be because: * The selected alarm source (iPod or USB) is not connected or inserted. Ensure the device is connected or the CD is inserted. * The alarm type is set to BEEP. Change the alarm type to SRC+BEEP or SOURCE.
How to stop digital equipment from producing noises on Yamaha TSX-112 Stereo System?
If your Yamaha Stereo System is picking up noise from digital or high-frequency equipment, it might be placed too close to the equipment. Try placing the unit farther away.
What does it mean when the clock flashes and the Yamaha TSX-112 Stereo System cannot be operated?
If the clock is flashing and your Yamaha Stereo System cannot be operated, the CLOCK on the rear panel might be set to SET, indicating that the unit is in clock setting mode. Set CLOCK on the rear panel to ON.
Why is the DAB station reception weak on my Yamaha TSX-112?
Weak DAB station reception on your Yamaha Stereo System is likely due to weak DAB signals. Try changing the height, direction, or placement of the antenna.
Why is there no sound from my Yamaha TSX-112 Stereo System when using iPod?
If you're not getting any sound from your Yamaha Stereo System when using an iPod, check the following: * Ensure the iPod is firmly set in the iPod dock. * Make sure headphones are not connected. * Update the iPod software version to the latest.
Why isn't my iPod charging on the Yamaha TSX-112 Stereo System?
If your iPod isn't charging on the Yamaha Stereo System, it could be due to these reasons: * The iPod might not be properly set in the iPod dock. Remove the iPod and set it in the dock again. * The system might be in power save mode. Set CLOCK to ON on the rear panel to cancel power save mode.
Why is DAB station information missing or inaccurate on my Yamaha TSX-112?
If the DAB station information is not appearing or is inaccurate on your Yamaha Stereo System, the DAB station might be temporarily out of service, or the DAB station information is not provided by the DAB broadcaster. Contact the DAB broadcaster.
Why does my Yamaha TSX-112 Stereo System suddenly skip tracks on my iPod?
If your Yamaha Stereo System suddenly cancels the music and starts playing another track without you doing anything, the iPod’s Shake to Shuffle function might be turned on. Turn off the Shake to Shuffle function in the iPod’s settings.
General| Impedance | 6 Ω |
|---|---|
| Driver diameter | 110 mm |
| Frequency range | - Hz |
| RMS rated power | 30 W |
| Audio output channels | 2.0 channels |
| AUX in | Yes |
| Bluetooth | No |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Dimensions (WxDxH) | 457 x 174 x 181 mm |
| USB connector type | USB Type-A |
| Supported radio bands | DAB, DAB+, FM |
| Preset stations quantity | 60 |
| Built-in charger | - |
| Power source type | AC |
| Product color | Black |
| Apple docking compatibility | iPhone, iPod |
Weight and Dimensions| Weight | 5100 g |
|---|
Important safety instructions and precautions for operating the unit.
Instructions on how to connect and set up an iPod in the unit's dock.
How to select and play music from a connected iPod.
Guidance on playing music from CDs and USB devices.
Initial scan procedure required before tuning into DAB stations.
Steps to tune into DAB radio stations using manual or automatic methods.
How to save and select favorite DAB radio stations using presets.
Steps to tune into FM radio stations using automatic or manual methods.
How to save and select favorite FM radio stations using presets.
Explains the alarm types, including SRC+BEEP, SOURCE, and BEEP.
Step-by-step guide to setting the alarm time, sound, and source.
To Next Page
