What to do if Yamaha TSX-112 does not operate properly?
If your Yamaha Stereo System isn't operating correctly, it might have experienced a strong electrical shock or a drop in power supply. To resolve this, turn the system off, disconnect the power cable, wait about 30 seconds, reconnect the power cable, and then turn the system back on.
Why does my Yamaha Stereo System suddenly turn off?
Your Yamaha Stereo System might be turning off suddenly due to a few reasons: * The automatic system off function may have turned the unit off after 60 minutes of inactivity with USB or CD playback stopped. * The sleep timer might be set. Turn the system back on and play the source again. * The AUTO POWER OFF function might be enabled. To play continuously, set AUTO POWER OFF to TIME OFF.
Why don't some button operations work on my Yamaha Stereo System?
If some button operations aren't working on your Yamaha Stereo System, the disc loaded into the unit might not be compatible. Use a disc supported by the unit.
Why does my Yamaha Stereo System make noise near other equipment?
If your Yamaha Stereo System is producing noises when near digital or high-frequency equipment, it's likely due to the unit being placed too close to that equipment. Try placing the unit farther away.
How to reduce noise during stereo broadcast on Yamaha TSX-112 Stereo System?
If you are experiencing excessive noise during stereo broadcast on your Yamaha Stereo System, it could be due to an improperly connected antenna. Ensure the antenna is connected correctly. Additionally, the radio station might be too far away, or the signal reception may be weak in your area. Try manual tuning to improve the signal or consider using a multi-channel outdoor antenna.
What to do if my Yamaha TSX-112 Stereo System does not operate properly?
If your Yamaha Stereo System isn't operating properly, it might have experienced a strong electrical shock or a power supply issue. To resolve this, turn the system off and disconnect the power cable. Wait for about 30 seconds, then reconnect the power cable and turn the system back on.
What to do if my Yamaha TSX-112 suddenly turned off?
If your Yamaha Stereo System suddenly turns off, it might be due to the automatic system off function, which activates 60 minutes after USB or CD playback stops. Turning the system back on and playing the source again should resolve this. Also, check if the sleep function is enabled. Alternatively, the AUTO POWER OFF function may be enabled; setting it to TIME OFF allows continuous playback.
Why does my Yamaha Stereo System sound distorted?
If your Yamaha Stereo System is producing cracked, distorted, or abnormal noise, it could be due to excessive volume from the input source or the unit itself, especially the bass. Try adjusting the volume using the VOLUME control. You can also adjust the Bass settings via the option menu.
How to fix Yamaha Stereo System when speakers make no sound?
If your Yamaha Stereo System speakers aren't producing any sound, first ensure the volume isn't set too low. Then, verify that you've selected the correct input source. Also, make sure headphones are not plugged in, as this will silence the speakers.
What does Unknown USB mean on my Yamaha TSX-112?
An “Unknown USB” message on your Yamaha Stereo System means: * The connected USB device is not playable on this unit. Connect a compatible USB device. * The file name is too long. The file name should be no more than 250 characters.
General| Impedance | 6 Ω |
|---|---|
| Driver diameter | 110 mm |
| Frequency range | - Hz |
| RMS rated power | 30 W |
| Audio output channels | 2.0 channels |
| AUX in | Yes |
| Bluetooth | No |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Dimensions (WxDxH) | 457 x 174 x 181 mm |
| USB connector type | USB Type-A |
| Supported radio bands | DAB, DAB+, FM |
| Preset stations quantity | 60 |
| Built-in charger | - |
| Power source type | AC |
| Product color | Black |
| Apple docking compatibility | iPhone, iPod |
Weight and Dimensions| Weight | 5100 g |
|---|
Important safety instructions and precautions for operating the unit.
Instructions on how to connect and set up an iPod in the unit's dock.
How to select and play music from a connected iPod.
Guidance on playing music from CDs and USB devices.
Initial scan procedure required before tuning into DAB stations.
Steps to tune into DAB radio stations using manual or automatic methods.
How to save and select favorite DAB radio stations using presets.
Steps to tune into FM radio stations using automatic or manual methods.
How to save and select favorite FM radio stations using presets.
Explains the alarm types, including SRC+BEEP, SOURCE, and BEEP.
Step-by-step guide to setting the alarm time, sound, and source.
To Next Page
