11
Preparation
Use MusicCast CONTROLLER to connect to a network
1 Download the dedicated MusicCast CONTROLLER app to your
mobile device on the App Store or Google Play.
2 Follow the app’s on-screen instructions to configure network
settings.
Note
• See the following when connecting to a network without using the MusicCast CONTROLLER
app.
− Using a network cable to connect to a network (
p. 43)
− Using Wi-Fi Protected Setup (WPS) to connect to a network wirelessly (
p. 44)
− Using iPhone settings to connect to a network wirelessly (
p. 45)
After connecting to a network using one of the methods described above, Yamaha
recommends downloading and installing the MusicCast CONTROLLER app to your mobile
device for simple operation of the unit.
• For more information on Internet connections, refer to the documentation provided with your
network devices.
• Security software installed on your computer or network device settings (firewall, etc.) may
prevent the unit from accessing your computer or Internet radio stations. If this occurs, modify
security software or network device settings to permit access by the unit.
Confirm that the unit
is turned on.
Important notice regarding information security
Visit the website shown below for details.
https://manual.yamaha.com/av/policy/mcc/
To Next Page
Loading...
Need help?
General
