ENGINE
3-17
5. Install:
• Fuel tank
Refer to “FUEL TANK” on page 7-1.
• Rear fender
• Passenger seat
Refer to “GENERAL CHASSIS” on page 4-1.
EAS21090
CHECKING THE CANISTER (for California
only)
1. Remove:
• Left side cover
Refer to “GENERAL CHASSIS” on page 4-1.
2. Check:
• Canister “1”
• Canister purge hose “2”
• Fuel tank breather hose “3”
• Canister breather hose “4”
Cracks/damage → Replace.
3. Install:
• Left side cover
Refer to “GENERAL CHASSIS” on page 4-1.
EAS21100
ADJUSTING THE EXUP CABLES
1. Remove:
• EXUP valve pulley cover “1”
2. Check:
• EXUP system operation
▼▼▼▼ ▼ ▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Activate the diagnostic mode and select the
diagnostic code No. D: 53.
Refer to “FUEL INJECTION SYSTEM” on
page 8-33.
b. Set the engine stop switch to “”.
c. Turn the main switch to “ON”.
d. Check that the EXUP valve operates proper-
ly.
1
12
12
13
12
2
18
19
18
14
14
6
18
15
20
3
4
17
16
5
20
17
15
8
8
6
9
9
7
10
(4)
11
21
2
3
1
4
1