Yamaha Vmax VMX17C 2009 - Installing the Top Cover

GENERAL CHASSIS
4-8
EAS2S31033
INSTALLING THE TOP COVER
1. Install:
• Top cover brackets
T
IP
First, tighten the bolts on the front side of the top
cover bracket, and then on the rear side.
2. Install:
• Top cover
▼▼▼▼ ▼ ▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼▼▼▼
a. Install the top cover bolts “1” temporarily.
b. Tighten top cover bolts “1” and “2”.
▲▲▲▲ ▲ ▲▲▲▲▲▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲▲▲▲
T
R
.
.
Top cover bracket bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
LOCTITE®
T
R
.
.
Top cover bolt “1”
1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
Top cover bolt “2”
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2
2
1
2