CHASSIS SPECIFICATIONS
2-10
EAS20300
CHASSIS SPECIFICATIONS
Chassis
Frame type Diamond
Caster angle 31.00°
Trail 148.0 mm (5.83 in)
Front wheel
Wheel type Cast wheel
Rim size 18M/C × MT3.50
Rim material Aluminum
Wheel travel 120.0 mm (4.72 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Rear wheel
Wheel type Cast wheel
Rim size 18M/C × MT6.00
Rim material Aluminum
Wheel travel 110.0 mm (4.33 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Front tire
Type Tubeless
Size 120/70R18M/C 59V
Manufacturer/model BRIDGESTONE/BT028F
Wear limit (front) 1.0 mm (0.04 in)
Rear tire
Type Tubeless
Size 200/50R18M/C 76V
Manufacturer/model BRIDGESTONE/BT028R
Wear limit (rear) 1.0 mm (0.04 in)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
Loading condition 90–190 kg (198–419 lb) (USA)
90–189 kg (198–417 lb) (California)
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
High-speed riding
Front 290 kPa (2.90 kgf/cm², 42 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
Front brake
Type Dual disc brake
Operation Right hand operation
Front disc brake
Disc outside diameter × thickness 320.0 × 5.5 mm (12.60 × 0.22 in)
To Next Page
Loading...
