Yamaha Vmax VMX17C 2009 - Throttle Bodies

THROTTLE BODIES
7-11
EAS26970
THROTTLE BODIES
Removing the throttle bodies
Order Job/Parts to remove Q’ty Remarks
Lower air filter case Refer to “AIR FILTER CASE” on page 7-6.
1 Accelerator position sensor coupler 1 Disconnect.
2 Throttle position sensor coupler 1 Disconnect.
3 Throttle servo motor coupler 1 Disconnect.
4 Intake air pressure sensor coupler 1 Disconnect.
5 Sub-wire harness coupler 2 Disconnect.
6 Fuel hose 1 Disconnect.
7 Canister purge hose 1
Disconnect.
For California only
8 Coolant temperature sensor coupler 1 Disconnect.
9 Throttle body joint clamp screw 4 Loosen.
10 Throttle bodies 1
11 Throttle cable (decelerator cable) 1 Silver adjusting bolt
12 Throttle cable (accelerator cable) 1 Black adjusting bolt
13 Throttle body joint 4
1
8
10
11
12
3
4
5
7
6
14
13
13
2
9
9
9
13
13
9
(8)
14
3 Nm (0.3 m
•
kgf, 2.2 ft
•
Ibf)
T
.R.
7 Nm (0.7 m
•
kgf, 5.1 ft
•
Ibf)
T
.R.
10 Nm (1.0 m
•
kgf, 7.2 ft
•
Ibf)
T
.R.