Yamaha Vmax VMX17C 2009 - Page 64

CHASSIS SPECIFICATIONS
2-11
Brake disc thickness limit 5.0 mm (0.20 in)
Brake disc deflection limit 0.10 mm (0.0039 in)
Brake pad lining thickness (inner) 4.5 mm (0.18 in)
Limit 0.8 mm (0.03 in)
Brake pad lining thickness (outer) 4.5 mm (0.18 in)
Limit 0.8 mm (0.03 in)
Master cylinder inside diameter 16.00 mm (0.63 in)
Caliper cylinder inside diameter 24.05 mm × 3 (0.95 in × 3)
Recommended fluid DOT 4
Rear brake
Type Single disc brake
Operation Right foot operation
Brake pedal position 21.0 mm (0.83 in)
Rear disc brake
Disc outside diameter × thickness 298.0 × 6.0 mm (11.73 × 0.24 in)
Brake disc thickness limit 5.5 mm (0.22 in)
Brake disc deflection limit 0.15 mm (0.0059 in)
Brake pad lining thickness (inner) 5.4 mm (0.21 in)
Limit 0.8 mm (0.03 in)
Brake pad lining thickness (outer) 5.4 mm (0.21 in)
Limit 0.8 mm (0.03 in)
Master cylinder inside diameter 14.0 mm (0.55 in)
Caliper cylinder inside diameter 41.30 mm (1.63 in)
Recommended fluid DOT 4
Clutch
Recommended fluid DOT 4
Release cylinder inside diameter 33.6 mm (1.32 in)
Master cylinder inside diameter 14.0 mm (0.55 in)
Steering
Steering bearing type Taper roller bearing
Center to lock angle (left) 35.0°
Center to lock angle (right) 35.0°
Front suspension
Type Telescopic fork
Spring/shock absorber type Coil spring/oil damper
Front fork travel 120.0 mm (4.72 in)
Fork spring free length 255.0 mm (10.04 in)
Limit 251.0 mm (9.88 in)
Collar length 222.6 mm (8.76 in)
Spring rate K1 8.30 N/mm (0.85 kgf/mm, 47.39 lb/in)
Spring stroke K1 0.0–120.0 mm (0.00–4.72 in)
Inner tube outer diameter 52.0 mm (2.05 in)
Inner tube bending limit 0.2 mm (0.01 in)
Optional spring available No
Recommended oil Suspension oil M1
Quantity 915.0 cm³ (30.94 US oz, 32.27 Imp.oz)
Level 104.0 mm (4.09 in)
Spring preload adjusting positions
Minimum 5