Yamaha Vmax VMX17C 2009 - Page 247

STEERING HEAD
4-82
2. Install:
• Lower ring nut “1”
• Rubber washer “2”
• Upper ring nut “3”
• Lock washer “4”
Refer to “CHECKING AND ADJUSTING
THE STEERING HEAD” on page 3-26.
3. Install:
• Upper bracket
• Steering stem nut
T
IP
Temporarily tighten the steering stem nut.
4. Install:
• Front fork legs
Refer to “FRONT FORK” on page 4-68.
T
IP
Temporarily tighten the upper and lower bracket
pinch bolts.
5. Tighten:
• Steering stem nut
Recommended lubricant
Lithium-soap-based grease
T
R
.
.
Steering stem nut
115 Nm (11.5 m·kgf, 85 ft·lbf)