Yamaha Vmax VMX17C 2009 - Page 353

CRANKCASE
5-80
9. Install:
• Middle drive pinion gear bearing retainer “1”
T
IP
Install the middle drive pinion gear bearing re-
tainer with its arrow mark “a” facing up.
10.Install:
• Main axle bearing retainer “1”
T
IP
Install the main axle bearing retainer with its
“OUT” mark “a” facing outward.
A. Lower crankcase
B. Upper crankcase
T
R
.
.
Middle drive pinion gear bearing
retainer bolt
24 Nm (2.4 m·kgf, 17 ft·lbf)
LOCTITE®
T
R
.
.
Main axle bearing retainer bolt
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
LOCTITE®
42
39
41
37
34
33
32
31
35
40
36
38
B
1
a
1
a