Yamaha XT550J - C.D.I. Rotor; Cam Chain and Guide Stopper; Crankcase Cover (Right); Kick Crank

E. Kick Crank
Loosen the kick crank securing bolt and
remove the kick crank.
NOTE:_-----------
The bolt must be completely removed from
the kick crank.
F. C.D.I. Rotor
1. Loosen the rotor securing nut by using
the rotor
holding tool (special tool P / N.
YS- 01880 (90890-01701)).
NOTE: _____________ _
Don't allow the tool to touch the projections.
2. Remove the rotor by using the rotor
puller (special tool P / N. YU-901 05).
G. Cam Chain and Guide Stopper
Loosen the guide stopper securing bolts and
remove the guide stopper,
baffle plate, and
cam chain.
3-7
H. Crankcase Cover (Right)
1. Remove the oil filter cover holding bolts
(3) and the cover.
2. Remove the
oil filter element.
3. Remove the crankcase cover holding
bolts
and the cover.
If
NOTE: ____________ _
For this removal, slits in the crankcase can be
used
as shown in the photo.
('