COOLING SYSTEM
Special Service Tools
12/05
BY Service Manual
7-5
© 2009 Yanmar Marine International
SPECIAL SERVICE TOOLS
Note: The tool numbers used in this section are either Yanmar or BMW part numbers. Yanmar part numbers
are referred to as Yanmar Part No. and BMW part numbers are referred to as OEM Part No. Tools
not having part numbers must be obtained locally.
MEASURING INSTRUMENTS
No. Tool Name Applicable Model and Tool Size Illustration
1
Cooling System
Tester (For
pressure-testing
the cooling
system and filler
cap)
Obtain locally
2
Belt Tool (For
removing and
installing
seawater pump
belt)
-
0003828
No. Instrument Name Application Illustration
1
Torque Wrench For tightening nuts and bolts to the specified
torque
0000840
To Next Page
Loading...
