Yardistry YM12944 - Step 27: Metal Hooks and Plaque

63 support@yardistrystructures.com
Step 27: Metal Hooks and Plaque
A: Two 50 mm Hooks are included with this unit for attaching wiring. They can be placed anywhere along the
Rafters as needed. Pre-drill with a 1/8” drill bit before installing. (g. 27.1 and 27.2)
B: Attach Gazebo ID Plaque to a prominent location on your gazebo with two #10 x 1-1/4” Pan Screws. This
provides warnings concerning safety and important contact information. A tracking number is provided to allow
you to get critical information or order replacement parts for this specic model. (g. 27.1 and 27.3)
Hardware
2 x #10 x 1-1/4” Pan Screw
Fig. 27.1
Fig. 27.2
50 mm Hook
Fig. 27.3
Note: We have provided two
50 mm hooks for optional use
to hold in place any wires if
required. These hooks are
not designed to hold any
heavy products such as
lights, ower pots, etc.
#10 x 1-1/4”
Pan Screw
Gazebo ID
Plaque
Components:
2 x 50 mm Hooks
1 x Gazebo ID Plaque