YASKAWA DX200 - Page 30

5 Initialization of System Configuration in Maintenance Mode
5-5
165559-1CD
HW1481993
DX200 Standard Setup
11. During initialization, the message “Initializing system data. Don’t turn
the power OFF” is displayed. Initialization needs approx. 30 seconds.
12. When initialization is completed, the buzzer sounds for a moment, and
at the same time, the message “Initializing system data. Don’t turn the
power OFF” disappears and {Maintenance mode} appears instead.
13. Turn OFF the DX200 main power supply.
The message “Initializing system
data. Don’t turn the power OFF”
appears.
“Maintenance mode”
appears again.
30/44