YASKAWA DX200 - Page 31

5-6
165559-1CD
HW1481993
DX200 Standard Setup
5 Initialization of System Configuration in Maintenance Mode
14. If the CF is inserted in the CF slot of the programming pendant,
remove it. Then, put the license sticker like shown below. The number
on the license sticker does not have to be recorded.
NOTE
If the system does not start up in the Maintenance mode
due to programming pendant hardware failure, never put
the licence sticker on it.
MANDATORY
Never fail to put the license sticker on the programming pendant before
shipment. It is illegal to ship the programming pendant without it.
Please be sure to put the sticker with the notation of “Windows CE 5.0”.
Put the license
sticker here.
31/44