5 Initialization of System Configuration in Maintenance Mode
5-7
165559-1CD
HW1481993
DX200 Standard Setup
15. Turn ON the DX200 main power supply.
The main menu appears in approx. 60 seconds. At this time, both
7-segment indicators of the YIF01 and EAXA21 indicate “d”.
16. Select {SYSTEM INFO} and then {VERSION} to confirm that the
version described in the Software Modification Instructions and the
version in the following window are the same. If EAXA21 boot version
is different, execute EAXA21 boot setup as described in Chapter 4
EAXA21 Boot Setup.
Check here for the version of
machine safety unit (YSF21-E)
boot.
Check here for the version of
EAXA boot.
Confirm the version
To Next Page
Loading...
