YASKAWA GA800 600 V Drive - Common Drive Specifications

5 Common Drive Specifications
10 YASKAWA TOEPC7106170VA GA800 600 V Drive Installation & Primary Operation
No. Description
6 Protection design
B: IP20/UL Open Type
W: IP55/UL Type 12 Heatsink External Mounting
7 Environmental specification
M: Resistant to dust/humidity
■ Rated Output Current
Table 4.2 gives the rated output current values.
Note:
• These output current values apply to drives that operate at standard specifications.
• Derate the output current for applications that require:
–Higher carrier frequencies
–Ambient temperature beyond nameplate ratings
–Drives installed side-by-side.
• Use C6-01 [Normal / Heavy Duty Selection] to select Normal Duty rating (ND) or Heavy Duty rating (HD).
Table 4.2 Three-Phase AC 600 V Class
Model
Heavy Duty Rating (HD)
Parameter C6-01 = 0
Normal Duty Rating (ND)
Parameter C6-01 = 1 (Default)
Maximum Applicable Motor
Output
kW (HP)
Rated Output Current
A
Maximum Applicable Motor
Output
kW (HP)
Rated Output Current
A
5382
261 (350) 336 298 (400) 382
5412
298 (400) 382 335 (450) 412
5472
335 (450) 412 375 (500) 472
5 Common Drive Specifications
Note:
• To get the OLV, CLV, and AOLV specifications, do Rotational Auto-Tuning.
• To get the longest product life, install the drive in an environment that meets the necessary specifications.
Table 5.1 Control Characteristics
Item Specification
Control Methods
• V/f Control (V/f)
• V/f Control with Encoder (CL-V/f)
• Open Loop Vector (OLV)
• Closed Loop Vector (CLV)
• Advanced Open Loop Vector (AOLV)
Carrier Frequency
Models 5382 to 5472:
2 kHz without derating the drive capacity.
Maximum Output
Voltage
600 V Class: Three-phase 500 V to 600 V
Note:
The maximum output voltage is proportional to the input voltage.
Frequency Control
Range
• AOLV: 0.01 Hz to 120 Hz
• CL-V/f and CLV: 0.01 Hz to 400 Hz
• V/f, and OLV: 0.01 Hz to 590 Hz
Frequency Accuracy
(Temperature
Fluctuation)
Digital inputs: Within ±0.01% of the maximum output frequency (-10 °C to +40 °C (14 °F to 104 °F))
Analog inputs: Within ±0.1% of the maximum output frequency (25 °C ±10 °C (77 °F ±18 °F))
Frequency Setting
Resolution
Digital inputs: 0.01 Hz
Analog inputs: 1/2048 of the maximum output frequency (11-bit signed)
Output Frequency
Resolution
0.001 Hz
Frequency Setting
Signal
Main speed frequency reference: -10 Vdc to +10 Vdc (20 kΩ), 0 Vdc to 10 Vdc (20 kΩ), 4 mA to 20 mA (250 Ω), 0 mA to 20 mA (250 Ω)
Main speed reference: Pulse train input (maximum 32 kHz)