YASKAWA MA2010 - Connector Types and Diagrams

Internal cables and compressed air lines
8
- 41
• For the power cable when arc welding the nominal current may not exceed 500A. In
permanent operation the current may not exceed 80% of the nominal current
(permissible current at permanent operation = 80% x (500A/operating current)²).
Fig. 8-1: Connectors for internal user I/O wiring harness and air line
Welding power cable
Air outlet with cap A Air inlet with cap A
Air outlet with cap B Power cable for arc welding (recom-
mended connection: R100-10, cover
(TS200CHM) is included in the deliv-
ery).
Connector plug for the internal cable
feedthrough: JL05-2A20-29SC (sock-
et connector with a cap) JL05-6A20-
29P.
View A
Power cable for arc welding
(TS200CHM)
Connector plug for the internal cable
feedthrough: JL05-2A20-29PC (sock-
et connector with a cap) JL05-6A20-
29S.
Air inlet with cap B
List of connector types
Description Type of connector
Connector for the internal user I/O wiring
harness on the base
JL05-2A20-29PC (optional: JL05-6A20-
29S)
Connector for the internal user I/O wiring
harness on the U-arm
JL05-2A20-29SC (optional: JL056A20-
29P)
3BC
2BC
1BC
A
1
2
3
4
5
7
9
6
8
1
6
2
7
3
8
4
9
5