Transportation
3 - 18
3.3 Damping material during transportation
NOTICE
Before turning ON the power, check to be sure that the rubber buffer are removed.
After removing the rubber pads, keep them at a safe place. The rubber pads will be required
again if the system is transported again.
The robot is furnished with damping material for transportation (see section A and B in the ).
Fig. 3-1: Damping material during transportation
Housing L-arm
U-arm Mechsnical operation limit
A
B
1
2
3
1
4
1
3
2
4
To Next Page
Loading...
