YASKAWA MOTOMAN-ES200RN - Components for Altering Operating Range

5.5 Alterable Operating Range
5-5
HW0482143
5.5.1 Components for Altering Operating Range
Arrange the components listed in " Fig. 11 The Components of the S-Axis Stopper ", when
modifying the angle of S-axis.
 Pin (drawing No. HW0402104-1, 1 pin)
 Stopper (drawing No. HW0302424-2, 1 stopper)
 Hexagon socket head cap screw M20
(length: 45mm) (3 screws) (tensile strength: 1200 N/ mm
2
or more)
 Flat washer M20 (3 flat washers)
Fig. 11 The Components of the S-Axis Stopper
HW0302424-2
Section A-A
Hexagon socket head cap screws M20 (3 screws)
(length: 45) (tensile strength: 1200 N/mm
2
)
Flat washer M20
Stopper
Pin
HW0402104-1
A
A
26/71
HW0482143